1mm 2mm soft rubber EVA foam roll self adhesive backed in rolls and
sheet for cosplay
EVA foam also known as Ethylene-Vinyl Acetate foam is a closed cell
material that usually comes in large sheets. EVA foam is UV
resistant and is often used for hot tub insulation, gym mats,
fishing rods, soccer cleats and even biomedical drug delivery
devices. EVA is also tear resistant and has fantastic shock
absorption properties
Advantage:
1.
Good elasticity and compression
2. Insulation
3. Shakeproof
4. Heat and noise reduction
5. Light weight and chemical resistant
6. Antibacterial
7. Waterproof
8. Nontoxic
9. Bright and colorful colors
10. Suitable for a wide temperature range
Specification:
Material | Hardness (Shore C) | Density (kg/m3) | Foam Rate | Water Absoprtion (%) |
EVA | 25±5 | 90±20 | 40 | ≤1 |
EVA | 35±5 | 110±20 | 35 | ≤1 |
EVA | 45±5 | 110±20 | 20 | ≤1 |
EVA | 55±5 | 110±20 | 20 | ≤1 |
EVA | 65±5 | 180±20 | 20 | ≤1 |
Parameters are for reference only and are customized according to
customer requirements.
Density
(kg/m³) | Hardness
(Shore A) |
27 | 11.3 |
31 | 12.9 |
36 | 15 |
43 | 18 |
54 | 22.5 |
72 | 30 |
108 | 45 |
120 | 50 |
127 | 52.9 |
135 | 56.3 |
144 | 60 |
154 | 64.3 |
168 | 69.2 |
180 | 75 |
192 | 80 |
Applications:
ESD EVA Tray PEF Foam
(Secondary Foaming Low Density EVA Foam)
FAQ:
Q1:How to classify EVA foam according to hardness?
1)High elastic EVA:15-25°
2)Ordinary EVA:38°
3)Medium density EVA:45-60°
4)High density EVA:65-80°
Q2:Is EVA a plasitc or rubber product?
EVA has the properties of both plastic and rubber, so it can be
classified as a "semi-rubber" material.
Traditional plastics are mainly composed of carbon, hydrogen,
oxygen and other elements,
while rubber is mainly composed of carbon, hydrogen, oxygen and
nitrogen. From a molecular structure perspective,
EVA is quite different from traditional plastics and rubber, which
is one of the reasons for its classification controversy.
Q3:What's the relationship between hardness and density of EVA
foam?
EVA foam density is divided into three standards according to
hardness:
1)High foaming hardness is 5%-40%,
2)Secondary foaming hardness is 40%-55%
3) Primary foaming hardness is 55%-75%,
Currently 38-60 °,Most used in packaging linings
